How to Use a Caulk Gun

Tips for Using a Caulk Gun to Help with Home Maintenance Projects for Your Silver Spring Area Home

Caulk guns are an important tool for many jobs around the house, but they can be tricky to use. This article will show you how to use caulk guns so you can seal your home with ease.

If your caulking jobs are getting sloppy or incomplete, it’s likely because you’re not using a caulk gun correctly. When you’re purchasing caulk, many brands come in tubes and tips that are specifically designed for a caulk gun. If you’re using a tip with the wrong tube or feeding it into the gun improperly, it’s no wonder your job isn’t done right. Follow these steps to ensure that every caulking job is accurate and neat.

1. Load the Tube Correctly. Inserting the tube into your caulk gun should be simple; but if there are instructions included with your kit, follow those instructions carefully. The most common mistake is to insert the tube upside down; this will result in air bubbles in the tube, and you won’t get a smooth flow of latex.
2. Insert the Tip Correctly. When you insert the tip, it should be in the back of the gun and should have a little wiggle room. If part of the tip falls out, it’s possible that you’re inserting it upside down or too far into the gun.
3. Feed It In. A steady stream of caulk is much easier to remove than one that just dumps out everywhere. If you keep trying to push your caulk in with your finger, you’re just going to push it all over your work surface once it’s off (not as messy as a mess of old caulk, but still messy).
4. Work a Clean Up. If there’s any excess caulk left, you can either place it back in the tube and try to force it through the gun or you can use a cut-up piece of old cloth (old T-shirt works well) as a scoop to carry all that extra caulk back into the tube.

Contact Handyman Connection of Silver Spring

Fill out a form to schedule a free home improvement estimate. Call (301) 215-3319 if you have any questions or would like to learn more about our services.